Click image to view full size image
specification |
Equipment name |
UNIT |
QTY |
ZJ-V5B |
Hydraulic shaftless mill roll stand |
a |
2 |
/ |
Paper trolley |
a |
4 |
RG-1-900 |
preheater |
a |
2 |
SF-320C |
Fingerless type single facer |
a |
1 |
ZDF |
Conveyor bridge |
set |
1 |
DHC-150 |
Single corrugated the aspect Cutter |
a |
1 |
2ply Corrugated Cardboard Production Line
Main technical parameters and requirements in production line
1.Type:WJ-200-2200 single corrugated cardboard production line:
2.Max Produce width:2200mm
3.Design speed:200m/min
4.Economic speed:900-120m/min
5.Note:Production line speed test paper should meet the following requirements:(Equipment surface temperature not lower than 172 ℃ above)
Paper grade of not less than B grade
Paper moisture content of about:11%±2%
Facial tissue:100—250g/m2
Core paper:100--180g/m2
6.Flute-type combination:A ,C, B, E(Or a choice by the customer)
7.Steam about500Kg/Hr; Maximum pressure:1.2Mpa;Common pressure:0.8-1.1Mpa
8.Power supply:380V 50Hz Three-phase four-wire system
9.Equipment installed total power:about 90KW Actual electric consumption:about30KW
10.Equipment area:about 30m×11m×5m(Specific length of foundation Figure prevail)
11.Equipment out of paper orientation:according to user’factory to determine drive left or right.
12.Equipment applicability,Available in A, B, C class domestic or imported paper Paper
http://www.packmachine.net/